UP wardrobe lift 87-120 polished HS

Wardrobe lift 87x120 – polished. The package contains: horizontal rail, main rod, left and right lift, plastic 90° connectors, screws and an Allen key. Color: the lift cover is black, while the lift supports and horizontal and vertical rails have a polished silver finish. Installation instructions: 1. Secure the left and right lift to the cabinet body with at least 8–12 screws. Make sure the left and right lifts are positioned symmetrically, vertically and horizontally. The lift position relative to the back of the cabinet body is 175 mm, and relative to the top of the cabinet body 610 mm – see image. 2. Use an M3 screw to connect the main rod to the horizontal rail that connects both lifts. Position the main rod in the center of the horizontal rail in the plastic connector. 3. Install the handle on the main rod using an M3 screw and determine the width of the horizontal rail, which should be 9 cm shorter than the internal cabinet-body dimension. 4. Lower the left and right lift supports and connect them to the horizontal rail using the plastic 90° connectors and an Allen key. The main rod with handle should remain centered on the horizontal rail during lift operation.