PVS V40 glass support 10mm 100cm

Vetro 40 glass support – 10 mm. The glass support is used when making sliding glass doors with the Vetro 40 sliding system. The Vetro 40 metal mechanism is also used together with the Vetro 40 glass support. The set contains two aluminum profiles (glass supports) 1000 mm long, 20 PVC inserts placed between the supports and the 10 mm glass infill, 20 bolts with nuts connecting the supports that hold the glass infill, and two PVC end caps installed on the lateral ends of the glass supports. No prior drilling of the glass infill is required to install the Vetro 40 glass support. Note: a torque wrench is required to install the clamps because the screw tightening torque must not exceed 15 Nm to prevent the glass from breaking.